How to install a household tap water booster pump
1. To install a booster pump, it is necessary to determine the installation location and check for any loose components. The pipeline should be cleaned thoroughly and there should be no blockages. When installing, it is necessary to determine the direction of water flow based on the direction indicated by its arrow, and adopt vertical or horizontal installation. Install it in front of the water meter, and also install a check valve. The socket needs to be installed in place before installation.
2. Next, install a regulating valve on the inlet and outlet pipelines of the water pump, and install a pressure gauge at the outlet to effectively control the water pump and determine its flow range.
How to adjust the pressure of tap water booster pump
1. Many high-rise residents choose to install booster pumps, which can solve the problem of very low water flow. But if not installed properly, it can also cause trouble. The booster pump requires correct pressure regulation, which can be divided into two situations.
2. If the pressure is too high, you need to find a way to reduce it. If the installation at home is fully automatic, this ordinary differential pressure type cannot adjust the pressure. However, we can simply close the valve at the inlet and adjust its water flow rate. When the water flow becomes larger, the pressure will decrease.
3. If non automatic is selected, generally speaking, when installing valve J at the inlet and outlet of the faucet, the pressure of the inlet and outlet of the valve can be adjusted. When the water consumption at home increases, the pressure will decrease accordingly.
4. If you want to increase the pressure, choose to increase the frequency of the power supply, such as reaching 60 Hz. Alternatively, choose a booster pump power that is suitable for the pressure level, such as reaching 150 watts, to meet the purpose of increasing pressure.
-
